TAUBREMS

Multiuse belay / abseil device with innovative and compact design (registered design), suitable for use with half, twin and single ropes for mountaineering, multi-pitch sport climbing and trad routes. Intuitive and easy to use, the Be Up has a modular braking system to optimise braking with all types of rope and allow the auto-locking and independent belaying of two seconds.

Extreme flexibility permits:
effective belaying of the leader. The particular shape of the Be Up‘s body allows rope to be paid out fluidly, rapidly and without jams;
while belaying the leader on a multipitch route using two ropes, the Be Up lets you pay out one rope while the other is locked-off, Be Up is the only such device that lets you do this;
effective, modular braking of the rope: the “V” notches are specially designed to guarantee better braking control when arresting a fall, abseiling or bringing up seconds;;
the bringing-up of one or two seconds, with auto-locking and each second being belayed independently of the other (guide mode). The Be Up‘s special shape and the attachment ring built into the body allow you to bring up one or two seconds using twin or half ropes with Ø = 7.3 mm. You can continue to bring-up one second while the other is hanging with their rope locked-off in the Be Up;
the unlocking of the rope and lowering of one free-hanging second, without difficulty, with twin or half Ø = 7.3 mm ropes. Be Up is the only such device that lets you do this, simply by inserting a normal HMS carabiner in the unlocking hole;
rapidly switching from taking-in (guide mode) to belaying the leader, for leading through;
abseiling descents, keeping the ropes separate. The “V” notches allow you to effectively control the rate of descent, without twisting the ropes.

Construction details/specification:
light, extremely functional form, for the highest performance;
hot-forged body for strength;
attachment ring is part of body, easily identified to prevent errors of attachment;;
plasticised steel cable, so you can‘t drop the Be Up and to limit its movement during belaying.

85g.

Taubrems tiltenkt bruk i fjellet.
Du kan sikre statisk eller dynamisk avhengig av hvilken innstilling som benyttes.

Passer helttau med diameter fra 8.9mm-10.5mm, eller halvtau/tvillingtau med diameter fra 7.7-9mm.

Multiuse belay / abseil device with innovative and compact design (registered design), suitable for use with half, twin and single ropes for mountaineering, multi-pitch sport climbing and trad routes. Intuitive and easy to use, the Be Up has a modular braking system to optimise braking with all types of rope and allow the auto-locking and independent belaying of two seconds.

Extreme flexibility permits:
effective belaying of the leader. The particular shape of the Be Up‘s body allows rope to be paid out fluidly, rapidly and without jams;
while belaying the leader on a multipitch route using two ropes, the Be Up lets you pay out one rope while the other is locked-off, Be Up is the only such device that lets you do this;
effective, modular braking of the rope: the “V” notches are specially designed to guarantee better braking control when arresting a fall, abseiling or bringing up seconds;;
the bringing-up of one or two seconds, with auto-locking and each second being belayed independently of the other (guide mode). The Be Up‘s special shape and the attachment ring built into the body allow you to bring up one or two seconds using twin or half ropes with Ø = 7.3 mm. You can continue to bring-up one second while the other is hanging with their rope locked-off in the Be Up;
the unlocking of the rope and lowering of one free-hanging second, without difficulty, with twin or half Ø = 7.3 mm ropes. Be Up is the only such device that lets you do this, simply by inserting a normal HMS carabiner in the unlocking hole;
rapidly switching from taking-in (guide mode) to belaying the leader, for leading through;
abseiling descents, keeping the ropes separate. The “V” notches allow you to effectively control the rate of descent, without twisting the ropes.

Construction details/specification:
light, extremely functional form, for the highest performance;
hot-forged body for strength;
attachment ring is part of body, easily identified to prevent errors of attachment;;
plasticised steel cable, so you can‘t drop the Be Up and to limit its movement during belaying.

85g.

Following the natural trend of the companies to produce thinner and lighter EN 892 dynamic ropes, we decided to update the marking of our belay device CLICK UP. Several internal tests proved that CLICK UP works perfectly with single ropes Ø 8.6 mm. No modification has been carried out on the device, therefore all the CLICK UP already existing and sold can be used with single ropes from 8.6 to 10.5 mm.

CLICK UP is an innovative belay device developed for sport climbing. It is simple to use and its innovative design has safety features that prevent mistakes. Easy to use, intuitive and safe, it is extremely lightweight and compact.











Following the natural trend of the companies to produce thinner and lighter EN 892 dynamic ropes, we decided to update the marking of our belay device Click Up. Several internal tests proved that Click Up works perfectly with single ropes Ø 8.6 mm. No modification has been carried out on the device, therefore all the Click Up already existing and sold can be used with single ropes from 8.6 to 10.5 mm.

Click Up is an innovative belay device developed for sport climbing. It is simple to use and its innovative design has safety features that prevent mistakes. Easy to use, intuitive and safe, it is extremely lightweight and compact.

It presents many advantages:
it allows you to quickly and fluidly feed rope without jamming;
it allows to arrest a fall simply by pull down the free hand of the rope;
it operates without the need to act on levers and moving parts;
especially suitable for beginners and children because intuitive and error-proof.

Total use safety! The final, but most fundamental feature, is in the case of incorrect use. Should the device be used incorrectly, Click Up continues to allow you to break and lower your partner in complete safety, thanks to the V-shaped braking notches present. This is the most appreciated feature, as it avoids several mistakes that can happen during the use of belay devices while climbing, both indoors or outdoors. It makes Click Up the right belay device for rock climbing schools and climbing gyms.

Click Up is supplied and must be used with the proper CONCEPT SGL HC, carabiner with hard-coated wear-proof anodization and ACL system that prevents the possibility of the cross loading.

Click Up + er en innovativ manuell sikringsbrems, utviklingen av den godt etablerte Click Up modellen som har vært tilgjengelig i syv år. Spesifikt laget for innendørs og sportsklatring, bremsen kan bli brukt med alle dynamiske enkelttau mellom 8,5 til 11 mm. Lett og kompakt, gir den mulighet for sikring av lederklatreren eller toptauklatreren, med begge hendene på tauet.

Ascender for the right or left foot, when used in conjunction with an ascender handle (e.g. QUICK’UP +) or a chest ascender (e.g. CHEST ASCENDER HC), makes it easier and speeds up the ascent of a rope.

Main characteristics:

specific speleological use, allows for rope hooking with only one hand and unhooking with a backward movement of the leg;
cam / lever mechanism fully integrated into the body;
self-cleaning cam that enables the functioning even on dirty or icy ropes;
fully adjustable webbing for the correct positioning on the boot;
reinforcement on the lower side with a tubular webbing.

Left or right-hand light alloy ascender handle with ergonomic rubber grip for climbing ropes.

Main characteristics:

new overmolded, ergonomic handle ascender, designed for greater efficiency when pulling and increased resistence to wear and tear;
cam opening lever usable with one hand; patented system for unlocking the cam, with just one downwards movement necessary (Fig A-B-C);
steel cam, manufactured with technology that implements the resistance to wear and tear. Equipped with a set of teeth that protects the wear of the rope, but it is equally effective in blocking and ascending the rope. It also has three slots to prevent the accumulation of mud and reduce the effort needed to slide the device up the rope under any condition (muddy rope, frozen etc.);
two attachment holes for various possible uses, anti-inversion cam system, secondary hole for connecting a maglia rapide for an etrier;
working load increased to 140 kg.

Ultra-light pulley / rope clamp (only 80 g!) designed for work, rope climbing maneuvers, rescue and self-rescue situations.
Main technical features:
mobile side plates for the rope or on sling placement;
spring operated cam for use as a rope ascender;
sliding lock for use as a pulley;
ideal for the crevasse rescue;
it allows the hauling of light loads;
developed to work also on wet or dirty ropes;
it can be used to adjust the positioning on webbing or daisy chain.
Vekt 80g
Tau dimmensjon: 8-13mm
slynge dimmensjon: 10-16mm